Parallel Menu - Lexmark 26H0122 - T 430d B/W Laser Printer User Manual

Parallel Menu

Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel
port (either Std Parallel or Parallel Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Menu item Purpose
Advanced
To enable bidirectional
communication through the
Status
parallel port.
Honor Init
To determine whether the printer
honors hardware initialization
requests from the computer. The
computer requests initialization by
activating the INIT signal on the
parallel interface. Many personal
computers activate the INIT signal
each time the computer is turned
on and off.
MAC Binary To configure the printer to process
Macintosh binary PostScript print
PS
jobs.
NPA Mode To specify whether the printer
performs the special processing
required for bidirectional
communication, following the
conventions defined in the
Network Printing Alliance (NPA)
Protocol.
Note: Changing this menu item
automatically resets the printer.
Understanding the operator panel
Using the printer menus
96
Values
Off Disables parallel port negotiation.
On* Enables bidirectional
communication through the
parallel interface.
Off* Printer does not honor hardware
initialization requests from the
computer.
On Printer honors hardware
initialization requests from the
computer.
On Printer processes raw binary
PostScript print jobs from
computers using the Macintosh
operating system.
Note: This setting often causes
Windows print jobs to fail.
Off Printer filters PostScript print jobs
using standard protocol.
Auto* Printer processes print jobs from
computers using either Windows
or Macintosh operating systems.
On Printer performs NPA processing.
If data is not in NPA format, it is
rejected as bad data.
Off Printer does not perform NPA
processing.
Auto* Printer examines data and
determines the format and then
processes it appropriately.