Lexmark 26H0122 - T 430d B/W Laser Printer User Manual page 82

Menu item Purpose
Factory To return your printer settings to
the factory default values.
Defaults
Remove To remove Print and Hold jobs,
since unwanted jobs may tend to
Held Jobs
pile up and use too much memory.
Note: This is only displayed if
there are Print and Hold Jobs
stored in memory.
Format To format the flash memory.
Flash
Warning:
printer while the flash is formatting.
Hex Trace To help isolate the source of a print job problem. With Hex Trace selected, all data sent to
the printer is printed in hexadecimal and character representation. Control codes are not
executed.
To exit Hex Trace, turn the printer off or reset the printer from the Job Menu.
Print To print a list of all the resources stored in flash memory or on the hard disk.
Directory
Note: Print Directory is available only when either a nondefective flash or disk is installed
and formatted, and Job Buffer Size is not set to 100%.
Print Fonts To print a sample of all the fonts
available for the selected printer
language.
Print Menus To print a listing of the current user default values, the installed options, the amount of
installed printer memory, and the status of printer supplies.
Print Net To print information relating to the internal print server and the network settings defined by
the Network Setup menu item in the Network Menu.
Setup
Understanding the operator panel
Do not turn off the
Using the printer menus
82
Values
Restore • All menu items are returned to
the factory default values
except:
– Display Language.
– All settings in the Parallel
Menu, Serial Menu, Network
Menu, and USB Menu.
• All downloaded resources
(fonts, macros, and symbol sets)
in printer memory (RAM) are
deleted. (Resources residing in
flash memory or on the hard
disk are unaffected.)
Do Not Restore User-defined settings remain.
Confidential
Causes all Confidential Print and
Hold jobs to be removed.
Held
Causes all non-Confidential Print
and Hold jobs to be removed.
All
Causes all Print and Hold jobs to
be deleted.
Yes Deletes any data stored in flash
memory and prepares the flash
memory to receive new resources.
No Cancels the request to format the
flash memory and leaves current
resources stored in flash memory.
PCL Fonts Prints a sample of all printer fonts
available for PCL emulation.
PS Fonts Prints a sample of all printer fonts
available for PostScript emulation.
PPDS Fonts Prints a sample of all printer fonts
available for PPDS emulation.