Lexmark 26H0122 - T 430d B/W Laser Printer User Manual page 110

Message
50 PPDS Font Error
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Std Network Software
Error
55 Unsupported Flash
in Slot X
56 Std Parallel Port
Disabled
Understanding the printer messages
What this message means
The PPDS interpreter has encountered
a font error or the printer has received
invalid PPDS download font data.
The printer detects defective flash
memory.
There is not enough free space in the
flash memory to store the data you are
trying to download.
The printer detects unformatted flash
memory.
The printer cannot establish
communications with an installed
network port.
The printer detects an unsupported
flash memory card in one of the
connectors.
Data has been sent to the printer
through a parallel port, but the parallel
port is disabled.
Understanding the printer messages
What you can do
• Press Go to clear the message and
continue printing.
• Press Menu to open the Job Menu
and cancel the job or reset the
printer.
Press Go to clear the message and
continue printing. You must install
different flash memory before you can
download any resources to flash.
• Press Go to clear the message and
continue printing. Downloaded fonts
and macros not previously stored in
flash memory are deleted.
• Delete fonts, macros, and other data
stored on the flash memory.
• Install flash memory with more
storage capacity.
• Press Go to clear the message and
continue printing. You must format
the flash memory before you can
store any resources on it.
• If the error message remains, the
flash memory may be defective and
require replacing.
• Press Go to clear the message and
continue printing. The job may not
print correctly.
• Program new firmware for the
network interface by way of the
parallel port.
• Press Menu to open the Job Menu
and reset the printer.
Turn the printer off. Remove the
unsupported option card.
• Press Go to clear the message. The
printer discards any data received
through the parallel port.
• Make sure the Parallel Buffer menu
item in the Parallel Menu is not set to
Disabled.
See also:
110
Parallel Buffer