Lexmark 26H0122 - T 430d B/W Laser Printer User Manual page 156

Problem
Faint images or repetitive spots
appear on the page.
Characters have jagged or uneven
edges, or image quality is poor.
The job prints, but the left and top
margins are incorrect.
Printing is too dark.
Troubleshooting
Solution
• Try a different type of print media. Print media designed for copiers
provides the best quality.
• Replace the used print cartridge with a new one. See
print cartridge for instructions.
• Change the Print Resolution
or 1200 dpi.
• If you are using downloaded fonts, verify that the fonts are supported
by the printer, the host computer, and the software application.
• Resolution was automatically reduced. Reduce the complexity of the
print job or add printer memory.
• Make sure the Paper Size
• Make sure the margins are set correctly in your software application.
Change the Toner Darkness
Note: Macintosh computer users should make sure the lines per inch
(lpi) setting is not set too high in the software application.
Solving print quality problems
156
setting in the Quality Menu to 600 dpi
setting in the Paper Menu is correct.
setting in the Quality Menu.
Changing the