Connecting The Signal Cable - Eizo FlexScan L 353T L353T-C L353T-C User Manual

2-2. Connecting the signal cable

NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (enclosed, MD-
C87)
Digital Input
FD-C39 (Optional)
2.
Power Cord
Signal Cable
Signal Cable
1.
5.
USB Cable
Connector of PC
•
Video Output
Connector/ D-Sub
mini 15 pin
Input Connecor
(monitor)/ D-Sub
mini 15 pin
Connector of PC
•
Video Output
Connector DVI-I
Input Connecor
(monitor)/ DVI
2. CABLE CONNECTION
Digital Signal
Input Connecter
Analog Signal
Input Connecter
Signal Cable
PC
Standard graphics card
PC
Digital Graphics card
English
13