Util2 Click Track Settings; Util1-7 Pan Depth Page; Util1-8 Auxiliary Output Page; Util2-1 Click-Track Voice Page - Yamaha DTX-MULTI Owner's Manual

UTILITY Setting Area (UTIL)
Pan Depth page
UTIL1-7
UTIL1-7<GENERAL>
≥≥PanDepth=≥64
1 Pan depth
Use this parameter to adjust the width of the instrument's
overall stereo-panning field while maintaining the individual
pan settings for drum and musical instrument sounds.
Settings 1 to 127
Auxiliary Output page
UTIL1-8
UTIL1-8<GENERAL>
AuxOutSel=L&R+ph
1 Auxiliary output selection (AuxOutSel)
Use this parameter to indicate where audio input via the AUX
IN jack will be output.
• L&R+ph ............. Auxiliary-input audio will be output via
both the OUTPUT (L/MONO and R) and
PHONES jacks.
• phones ................ Auxiliary-input audio will be output via
the PHONES jack only.
Settings L&R+ph or phones
UTIL2 CLICK
Click Track Settings
UTIL2
≥≥≥≥≥CLICK
In the CLICK section, you can set parameters related to the click
track. For example, you can set the type of sound to be used, the
volume, and where the click track will be output. MIDI parame-
ters related to the click track can also be set here. With the CLICK
page (UTIL2) displayed, press the [ENTER] button to access its
five parameter-setting pages (UTIL2-1 to UTIL2-5). You can use
the [B]/[C] buttons to navigate between these pages.
Click-track Voice page
UTIL2-1
UTIL2-1≥≥<CLICK>
Voice=Metronome1
1 Click-track voice
Use this parameter to select from a range of different sounds
for use with the click track.
Metronome1, Metronome2, Cowbell, Stick,
Settings
Human
84
Owner's Manual
UTIL2-2
1
1 Click-track master volume
Use this parameter to set the master volume for click-track
sounds.
Settings
UTIL2-3
1
1 Click-track beat volumes
Use these parameters to set volumes for different beat timings
within the click track. The meanings of the symbols used on
this page are shown below.
Example: Beat timings for four beats per bar
Accents
th
4 notes
th
8 notes
th
16 notes
th
8 note triplets
Settings
NOTE
• If the time signature from the PATTERN setting area or for pattern
recording is 3/8, 6/8, 9/8, 12/8, or 15/8, this page will display ACC, dot-
ted quarter notes, eighth notes, and sixteenth notes.
UTIL2-4
1 Click-track output selection (ClkOutSel)
Use this parameter to specify where the click track will be
output when activated. In a live-performance setting, for
example, you would normally want the click track to be out-
put to headphones only, and in such a case, "phones" should
be selected here.
1
• L&R+ph ............. The click-track will be output via both the
• phones ................ The click-track will be output via the
Settings
Click-track Master Volume page
UTIL2-2≥≥<CLICK>
≥≥≥Volume=127
0 to 127
Click-track Beat Volume page
UTIL2-3≥A...=9≥ƒ=9
≥≥≥≥∫=0≥ææ=0≥ø=0
0 to 9
Click-track Output page
UTIL2-4≥≥<CLICK>
ClkOutSel=phones
OUTPUT (L/MONO and R) and
PHONES jacks.
PHONES jack only.
L&R+ph, phones
1
1
1
1