Table of Contents
Advertisement
Setting Up for Sound
Turning On the Drum Module
1.
If you have connected your drum module to other audio
devices such as powered speakers, ensure that the vol-
ume on all other devices is turned down fully.
2.
Press the [
] (Standby/On) button.
The drum module will turn on and its buttons will light
up.
Turning Off the Drum Module
1.
If you have connected your drum module to other audio
equipment, ensure that the volume on all other devices
is turned down fully.
2.
Press the [
] (Standby/On) button.
The drum module will turn off and all button lights will
go out.
CAUTION
When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trou-
ble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet.
Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When
you are not using the product for a long time, make
sure to unplug the power cord from the wall AC outlet.
NOTICE
The drum module automatically stores all current settings
before it turns off. For this reason, please do not unplug the
power adaptor until all button lights have gone out.
Auto Power-Off
The Auto Power-Off function automatically turns off the
drum module after a certain period of inactivity. This helps
to save energy should you forget to turn it off yourself.
NOTE
The drum module automatically stores all current settings before
it turns off.
Setting the Auto Power-Off Function
You can set the amount of time that the Auto Power-Off
function will wait before turning off the drum module. For
details, see the description of the Auto Power-Off Time
parameter from Menu Mode (page 53).
20
DTX400K/DTX430K/DTX450K
Owner's Manual
NOTICE
• In certain modes of operation, the Auto Power-Off function will
not turn off the drum module when the set time has elapsed. We
recommend, therefore, that you always turn off the drum module
manually when you are finished using it.
• If you expect the drum module to be inactive for a certain length
of time while connected to other audio equipment, we recom-
mend that you turn the volume on the other equipment fully
down. Alternatively, you can disable the Auto Power-Off function
to ensure that the drum module stays on.
NOTE
• Settings for the Auto Power-Off function do not represent exact
times and there may be some variation.
• By default, the Auto Power-Off time is set to 30 minutes.
Quickly disabling Auto Power-Off
To quickly disable the Auto Power-Off function, turn on the
drum module while holding down the [TRAINING] button.
The function will remain off until you set a new Auto
Power-Off time.
Hold
Restoring the Default Settings
(Factory Set)
Straight out of the box, your drum module already contains
a wide range of pre-programmed drum kits and songs.
These default settings—collectively known as the Factory
Set—can be conveniently restored at any time if you have
accidentally overwritten them or wish to delete all of your
own settings. To do so, use the Factory Set function as fol-
lows.
NOTICE
When you restore the Factory Set as described below, any
changes you have made to parameters will be lost. Before pro-
ceeding, therefore, you should ensure that they contain no irre-
placeable settings.
1.
Press the [
] (Standby/On) button and verify that the
drum module turns off.
2.
Turn on the drum module while holding down the
[VOLUME+] button and the [VOLUME–] button.
The drum module's lights will flash and the Factory Set
will be restored.
Hold
Hide quick links:
Advertisement
Table of Contents
