Turning On The Drum Module; Turning Off The Drum Module; Auto Power-Off; Restoring The Default Settings (Factory Reset) - Yamaha DTX402K Owner's Manual

Electronic drum kit
Hide thumbs Also See for DTX402K:
Table of Contents

Advertisement

Setup
Setting Up for Sound

Turning On the Drum Module

1.
If you have connected your drum module to other audio
devices such as powered speakers, ensure that the vol-
ume on all other devices is turned down fully.
2.
Press the [
] (Standby/On) button.
The drum module will turn on and its buttons will light
up.
NOTE
Connect the hi-hat controller before turning on the drum
module. Please do not turn the drum module on with the hi-
hat controller depressed. The drum module can not identify
the type of pedal properly and it causes that the kick may
produce much smaller sound than expected.

Turning Off the Drum Module

1.
If you have connected your drum module to other audio
equipment, ensure that the volume on all other devices
is turned down fully.
2.
Press the [
] (Standby/On) button.
The drum module will turn off and all button lights will
go out.
NOTICE
The drum module automatically stores all current settings
before it turns off. For this reason, please do not unplug the
AC adaptor until all button lights have gone out.

Auto Power-Off

The Auto Power-Off function automatically turns off the
drum module after a certain period of inactivity. This helps
to save energy should you forget to turn it off yourself.
NOTE
The drum module automatically stores all current settings before
it turns off.
 Setting the Auto Power-Off Function
You can set the amount of time that the Auto Power-Off
function will wait before turning off the drum module. For
details, see the description of the Auto Power-Off Time
parameter from Menu Mode (page 54).
22
DTX402K DTX432K DTX452K Owner's Manual
NOTICE
• In certain modes of operation, the Auto Power-Off function will
not turn off the drum module when the set time has elapsed. We
recommend, therefore, that you always turn off the drum module
manually when you are finished using it.
• If you expect the drum module to be inactive for a certain length
of time while connected to other audio equipment, we recom-
mend that you turn the volume on the other equipment fully
down. Alternatively, you can disable the Auto Power-Off function
to ensure that the drum module stays on.
NOTE
• Settings for the Auto Power-Off function do not represent exact
times and there may be some variation.
• By default, the Auto Power-Off time is set to 30 minutes.
 Quickly disabling Auto Power-Off
To quickly disable the Auto Power-Off function, turn on the
drum module while holding down the number button [1].
The function will remain off until you set a new Auto
Power-Off time.
Hold
Restoring the Default Settings
(Factory Reset)
Straight out of the box, your drum module already contains
a wide range of pre-programmed drum kits and songs.
These default settings—collectively known as the Factory
Reset—can be conveniently restored at any time if you have
accidentally overwritten them or wish to delete all of your
own settings. To do so, use the Factory Reset function as
follows.
NOTICE
When you restore the Factory Reset as described below, any
changes you have made to parameters will be lost. Before pro-
ceeding, therefore, you should ensure that they contain no irre-
placeable settings.
1.
Press the [
] (Standby/On) button and verify that
the drum module turns off.
2.
Turn on the drum module while holding down the
VOLUME[+] button and the VOLUME[–] button.
Hold
The drum module's lights will flash and the Factory
Reset will be restored.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtx432kDtx452k

Table of Contents