Midi2 Midi Destination Switches; Pages When Messagetype Is Set To "Pc": Midi1-1 Program Change Page; Midi1-2 Midi Channel Page; Midi2-1 Tone Generator Switch Page - Yamaha DTX-MULTI Owner's Manual

MIDI Setting Area (MIDI)
Parameter-Setting Pages for
"PC" Messages
Program Change page
MIDI1-1
MIDI1-1≥-º¡-
M000/L000/PC001
2 3
1 Pad number
01 to 12, 13, 13R1, 13R2, 14 to 17, FTSW,
Settings
HHCL, or HHSP
B Bank select MSB (M)
Use this parameter to set a bank-select MSB value to be sent
whenever the pad indicated by 1 is struck.
Settings 000 to 127
C Bank select LSB (L)
Use this parameter to set a bank-select LSB value to be sent
whenever the pad indicated by 1 is struck.
Settings 000 to 127
D Program change (PC)
Use this parameter to set a program-change number to be sent
whenever the pad indicated by 1 is struck.
Settings 001 to 128
MIDI Channel page
MIDI1-2
MIDI1-2≥-º¡-
≥≥≥MIDI≥Ch=10
1 Pad number
01 to 12, 13, 13R1, 13R2, 14 to 17, FTSW,
Settings
HHCL, or HHSP
B MIDI channel (MIDI Ch)
Use this parameter to set the MIDI channel for the program-
change messages to be sent whenever the pad indicated by 1
is struck.
Settings 1 to 16
66
Owner's Manual
1
4
1
2
MIDI2 TG/MIDI SWITCH
MIDI Destination Switches
MIDI2
≥TG/MIDI≥SWITCH
With the TG/MIDI SWITCH page (MIDI2) displayed, press the
[ENTER] button to access its two parameter-setting pages
(MIDI2-1, MIDI2-2). You can use the [B]/[C] buttons to switch
between these pages.
Tone Generator Switch page
MIDI2-1
MIDI2-1≥≥≥≥≥Ch≥1
≥TG≥Switch=off
1 MIDI channel (Ch)
Use this parameter to select the MIDI channel (1 to 16) to be
set.
Settings 1 to 16
B Tone generator switch (TGSwitch)
Use this parameter to indicate whether MIDI messages pro-
duced by playing pads and changing drum kits should be sent
to the internal tone generator. (Choose "on" to send to the
tone generator.)
Settings off or on
External MIDI Switch page
MIDI2-2
MIDI2-2≥≥≥≥≥Ch≥1
MIDI≥Switch=off
1 MIDI channel (Ch)
Use this parameter to select the MIDI channel (1 to 16) to be
set.
Settings 1 to 16
B External MIDI switch (MIDI Switch)
Use this parameter to indicate whether MIDI messages pro-
duced by playing pads and changing drum kits should be sent
to an external tone generator via the MIDI OUT connector on
the rear panel or the USB TO HOST port on the side panel.
(Choose "on" to send the messages.)
Settings off or on
1
2
1
2