Table of Contents
Advertisement
3
Set the number of measures by using the m cursor button to change the
focus to the
"MEASURE"
rotating the Jog Dial or using the m and 1-11 buttons.
The default length is
measures.
NOTE
The meter and number of measures in a pattern that contains data cannot be
changed. If you try to change these values, the message "NOT EMPTY" will
momentarily appear on the display.
Adjusting the Click
The RY20 has a built-in click sound which sounds on each beat of the
measure to serve as a rhythmic guide when you record in Real-time
Mode. You can change both the volume and the quantization of the
click sound.
1
Select the Click display page by pressing the [PAGE+] button until the
display indicates
"CLICK".
2
Set the volume by rotating the Jog Dial or using the a and m
buttons.
The default volume level is
NOTE
Pressing the [ and m buttons simultaneously resets the level to "00".
prompt. Change the number of measures by
measures. The range is
"02"
The range is from
"15".
Recording a User Pattern
measure to
"01"
"16"
to
"00"
"15".
47
Advertisement
Table of Contents
