Adjusting The Volume Balance Among The Keyboard Playing, Ensemble Sound, And Software Playback - Yamaha disklavier DKC-850 Operation Manual

Chapter
6
Advanced Song Playback
3
To replay the pedal part, press [+/YES] to select "ON" with
the cursor is on "P=."
4
Press [BACK] to return to the song playback screen.
Adjusting the Volume Balance among the Keyboard Playing,
Ensemble Sound, and Software Playback
[BALANCE]
Besides adjusting the overall volume, the volume balance among the
different sound sources as described below can be adjustable.
TG: Adjusts the volume of the ensemble sound reproduced by the
tone generator (TG) of the Disklavier control unit.
Audio: Adjusts the volume of the accompaniment or standard audio
sound pre-recorded in the software (CDs).
Voice: Adjusts the volume of the ensemble voice when you play using
the voice function.
■ Adjusting the TG Balance
1
Press [BALANCE] on the remote control.
The TG balance setting screen appears.
2
Press [+/YES] and [–/NO] to adjust the volume of the tone
generator.
Tone generator volume can be adjusted in a range of 10 to 127.
48
Piano Part L/R
=ON R=OFF P=ON
=BALANCE= -/+
TG BALANCE 100
Note:
You cannot adjust the volume
balance during the DisklavierRadio
playback.

See Chapter 8 "Advanced Piano
Playing – Playing the Disklavier
with an Ensemble Voice" on
page 69.
Note:
You can also use the dial on the
front panel to adjust the volume.