Yamaha disklavier DKC-850 Operation Manual page 85

Chapter
9
Video Synchronization
■ Using the Camcorder only
If your camcorder has both mic input and audio output, you can
perform video synchronized recording using the camcorder only.
1. Set the Disklavier control unit following the procedures 1 to 5 on
page 71.
2. Connect a camcorder to the Disklavier control unit.
RCA cord with
resistance
(not supplied)
Disklavier control unit
3. Select a destination medium and album.
4. Press [RECORD].
5. Start recording on the camcorder.
6. Press [PLAY].
7. Wait for approximately ten seconds, and then start playing your
song.
8. Press [STOP] when you finish playing your song.
9. Stop recording on the camcorder.
74
Camcorder
To mic/line
input
To audio
output
RCA cord
(not supplied)