Yamaha disklavier DKC-850 Operation Manual page 51

Chapter
5
Internet Direct Connection (IDC)
2
Select "Update" with the cursor buttons ([
[ ]), then press [ENTER].
The update screen appears if there is any update program
available.
You can scroll the screen up or down with the cursor buttons ([
[ ]).
3
Following the instructions on the screen, select the option
with the cursor buttons ([
[ENTER].
The download process of the update program starts.
4
Shut down the Disklavier control unit with [ON/OFF] on the
front panel after the download process is completed.
=Update=
urn OFF, urn ON again
while holding [PLAY]
The update program is now prepared.
Update the firmware following the procedures in Chapter 13 "Other
Settings – Updating the Disklavier Control Unit" on page 132.
40
=Internet= (1/1)
*D-Radio *MyAccount
*Update
= pdate=
pdate Available
------------------------
] [ ] [ ] [
=Update= [ ]
*Cancel
*Update Fir
=Update=
ow Downloading...
50% ( 1 / 1 )
] [ ] [ ]
]
]), then press