Yamaha RemoteLive Disklavier DKC-850 Connection Manual
Hide thumbs
Also See for RemoteLive Disklavier DKC-850:
- Operation manual (88 pages) ,
- Data list (16 pages) ,
- Function manual (13 pages)
Advertisement
Quick Links
Checking the Type of Your Piano
The DKC-850 Disklavier control unit can be connected to several models of Yamaha Disklavier pianos,
however, connections and setup procedures vary depending on the piano model. Check the model number
on the existing control unit and find your piano model following the descriptions below before connecting.
Note:
The model number of the control unit is on the upper part of the display.
■ Compatible Models when Equipped with DKC-850
If you are using the piano listed below, replace the existing control unit with DKC-850.
Models
Upright pianos
Disklavier Mark II XG Series
Disklavier Mark II XG Series (MX116, MX22, MX500) DKC50R
Disklavier Mark III Series (DU1A)
Grand pianos
Disklavier Mark II XG Series
Disklavier Mark III Series Full-Function Models
Disklavier Mark III Series Standard Models
Disklavier Mark III Series PRO Models
Disklavier Mark III Series Playback Models
For details on connections and setup, see "Replacing the Existing Control Unit with DKC-850" on page 2.
Important:
Please keep your existing control unit for future maintenance.
powered by RemoteLive™
Disklavier Control Unit DKC-850
Connection Guide
DisklavierTV service is available for U.S. customers only.
Model Number on the Control Unit
DKC500R, DKC500RXG, DKC500RW,
DKC500RWXG
DKC55RCD
DKC500R, DKC500RXG, DKC500RW,
DKC500RWXG
DKC55RCD
DKC60RCD
DKC55RCD
DKC55, DKC55CD
Advertisement
Related Manuals for Yamaha RemoteLive Disklavier DKC-850
Summary of Contents for Yamaha RemoteLive Disklavier DKC-850
- Page 1 DisklavierTV service is available for U.S. customers only. Checking the Type of Your Piano The DKC-850 Disklavier control unit can be connected to several models of Yamaha Disklavier pianos, however, connections and setup procedures vary depending on the piano model. Check the model number on the existing control unit and find your piano model following the descriptions below before connecting.
- Page 2 Tighten Loosen Cautions • Use the Yamaha PJP-PS02/PJP-PS04 adaptor, or an equivalent recommended by Yamaha. Use of other AC adaptors may result in damage, overheating, or fire. • Do not stretch the cable or bend its ends. • Do not attempt to use the cable if it is stretched or if the ends of the cable have been bent. Attempting to do so may cause interruptions to the power supply.
- Page 3 Important • Be sure to backup the data on your existing control unit to a floppy disk before connecting. • Please keep your original control unit for future maintenance. Turn on your piano, and reset settings on your control unit to its factory default.
-
Page 4: Connecting Monitor Speakers
Two audio cables (pin plug – phone jacks) on the rear of DKC-850 with audio cables. plug) are supplied to connect this unit (Example: connecting the Yamaha MSP3 monitor speakers) to the piano equipped with the Silent Piano™ function. Prepare suitable... -
Page 5: Setting The Type Of Your Piano
Setting the Type of Your Piano [SYSTEM] “PianoType” After you have connected DKC-850 to your piano, you must set the type of your piano. Press [SYSTEM] on the remote control. The system menu screen appears. =SYSTEM MENU= (1/2) Clock Adj. TimeZone Backup Restore... - Page 6 P.O.Box 1, Hamamatsu, 430-8650 Japan Copyright © 2013 Yamaha Corporation Sep-13...