Control Names And Functions - Yamaha Clavinova CVP-609 Reference Manual

Recording Melodies via Step Recording
The explanations here apply when one of "Ch1" – "Ch16" is selected in step 5 on
the bottom left of the display, you can input the notes one by one, using the controls below.
 Control Names and Functions
Event List
Song Position
(Measure: Beat:
Clock)
Cursor
Step Rec
Velocity
Length
CVP-609/605 Reference Manual
Indicates events such as note and Voice selection which have been input. For details,
refer to page 67.
Indicates the current Song position. Events such as note and Voice selection you have
input are recorded at the position indicated here. You can change the current position
by touching [ ] or [ ] below the Measure, Beat, and Clock* respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
Lets you move the cursor position.
Turning this on shows the Step Recording display, and turning it off shows the Song
Edit display.
Determines the velocity (loudness) of the note to be entered. The velocity value can be
specified within a range from 1 to 127. The higher the velocity value, the louder the
sound becomes.
Kbd.Vel: Actual resulting velocity
127
111
95
79
Determines the gate time (note length) of the note to be entered.
Normal: Staccato:
80%
Tenuto: Staccatissimo:
99%
Manual: The gate time can be set to any desired percentage by using the Data dial.
Creating/Editing MIDI Songs (Song Creator)
page 60. With [Step Rec] turned on at
63
47
31
15
40%
20%
61