Yamaha Clavinova CVP-609 Reference Manual page 28

Editing the Vocal Harmony Type (CVP-605)
By editing the parameters of the preset Vocal Harmony type, you can create your original Vocal Harmony type.
1
Touch the Vocal Harmony name to call up the Vocal Harmony Selection display.
2
Select the desired Vocal Harmony type.
3
Based on the settings of the selected Vocal Harmony type, edit them as desired.
When the Mode ( ) is set to "Chordal":
Harmony On/Off
Mode
Vocal Range
Song Ch
CVP-609/605 Reference Manual
4
Turns on or off the Vocal Harmony.
Although one of the three following Modes is automatically selected when a Vocal
Harmony type is selected, you can change the Mode.
NOTE
Some Vocal Harmony types have no Mode. When such a type is selected, the
Harmony notes are applied to the microphone sound (Lead note) even if you do not
play any keys and no Song is played back.
Auto When the [ACMP ON/OFF] or Left part is turned on, or a Song
(Vocoder/ contain chord data is being played back, the mode is automatically
Chordal) set to "Chordal. " In all other cases, the mode is set to "Vocoder. "
Vocoder The microphone sound is output via the notes you play on the
keyboard or via the Song playback notes.
Chordal The harmony notes are determined by the following three chord
types: chords played in the chord section of the keyboard (with the
[ACMP ON/OFF] turned on), chords played in the left hand
section of the keyboard (with the Left part turned on), and chords
contained in Song data for controlling the harmony. (Not available
if the Song does not contain any chord data.)
NOTE
If you want to apply the Vocal Harmony by pressing the chords in
the chord section when the Style is stopped, you need to set the
"Stop ACMP" parameter to a setting other than "Disabled" in the
Style Setting display
Set this to obtain the most natural vocal harmony, depending on your voice.
• Normal: Normal setting.
• Low: Setting for lower voice. This setting is also appropriate for growling and shouting.
• High: Setting for higher voice. This setting is also appropriate for singing close to the
microphone.
When set to one of 1 – 16, note data (played from a Song on this instrument or the
connected computer) of the corresponding channel is used to control the harmony.
When set to "Off, " Song data control over harmony is turned off.
When the Mode ( ) is set to "Vocoder":
(page 76).
Vocal Harmony Settings
4
28