Yamaha Clavinova CVP-609 Reference Manual page 11

1
Select the desired EQ type to be edited.
FLAT:
• Flat EQ settings. The gain of each frequency is set to 0dB.
HOME:
• Standard EQ settings for optimum sound in the home.
CONCERT:
• Optimum EQ settings for performing in a public space using the instrument's speakers.
AUXOUT PA:
• Optimum EQ settings for sending the instrument's sound to external PA devices through the
AUX OUT [L/L+R]/[R] jacks.
AUXOUT HIFI:
•
AUX OUT [L/L+R]/[R] jacks.
USER1/2:
• Your own custom EQ settings saved in step 4.
2
Adjust the Q (bandwidth) and the Center Frequency of each band.
The available Frequency range is different for each band. The higher the value of Q, the narrower the bandwidth.
3
Boost or cut each of the five bands as desired.
4
Touch (Save) then save the settings as a User Master EQ type.
Up to two EQ types can be created and saved.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE
If you want to save the Master EQ settings to the USB flash memory, save as a User Effect file. To do this: From the display
called up via [Menu]  [Utility]  [Factory Reset/Backup]  page 2/2, touch [Backup] of "User Effect" to execute the
Save operation
Effects
This instrument features the following Effect Blocks.
System Effect (Chorus, Reverb):
•
can adjust the depth of the System Effect. Refer to "Chorus/Reverb"
Insertion Effect 1 – 8 (CVP-609) / Insertion Effect 1 – 3 (CVP-605):
•
part. For each of these Effects, select an Effect type specifically for the desired part (for example, Distortion, which
would be applied only to the Guitar part).
Variation Effect:
• This Block can be used both as System Effects and Insertion Effects, and you can switch between
them.
These explanations covers the settings related to the Insertion Effects and Variation Effects on the Effect display. This
display is not available when the "Master" tab is selected at the top of the Mixer display.
CVP-609/605 Reference Manual
Optimum EQ settings for sending the instrument's sound to studio monitors through the
(page 96).
These Effects are applied to the entire sound of this instrument. For each part, you
Editing the Volume and Tonal Balance (Mixer)
(page 13).
These Effects are applied only to a specific
11