Yamaha Clavinova CVP-609 Reference Manual page 70

Quantize Strength
Delete You can delete the data of the specified channel in the Song. Checkmark the desired channel whose
data you wish to delete by touching, then touch [Execute] to actually delete the data.
Mix This function lets you mix the data of two channels and place the results in a different channel. It also
lets you copy the data from one channel to another.
Source 1 Ch
Source 2 Ch
Destination
Ch
Transpose This allows you to transpose the recorded data of individual channels up or down by a maximum of
two octaves in semitone increments.
1-16
All -
All +
NOTE
Setup The current settings of the Mixer display and other panel settings can be recorded to the top position
of the Song as the Setup data. The Mixer and panel settings recorded here are automatically recalled
when the Song starts.
Checkmark the items of playback features and functions that you wish to automatically be called up
along with the selected Song.
NOTE
CVP-609/605 Reference Manual
Determines how strongly the notes will be quantized. A setting of 100% produces
exact timing. If a value less than 100% is selected, notes will be moved toward the
specified quantization beats according to the specified percentage. Applying less
than 100% quantization lets you preserve some of the "human" feel in the
recording.
Original data (assuming 4/4 meter)
Quantizing strength = 100%
Quantizing strength = 50%
Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of the channel
specified here are copied to the destination channel.
Determines the MIDI channel (1 – 16) to be mixed. Only note events of the
channel specified here are copied to the destination channel. Besides the values 1 –
16, there is a "Copy" setting that allows you to copy the data from Source 1 to the
destination channel.
Determines the channel into which the mix or copy results will be placed.
Sets the Transpose value for each channel.
Decreases the Transpose value for all channels by 1.
Increases the Transpose value for all channels by 1.
Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If
you transpose the channels of Drum kits, the instruments assigned to each key will be changed.
Before executing the Setup operation, move the Song position to the top of the Song by pressing the
SONG [STOP] button.
Creating/Editing MIDI Songs (Song Creator)
Quarter-note length
70