Yamaha Clavinova CVP-609 Reference Manual page 12

Insertion Effect Lets you assign the desired Insertion Effect Type for each part by touching the area above each
knob. You can adjust the degree to which each Effect is applied by using the knobs.
If you want to assign each of the Insertion Effects to a specific Part and select an Effect Type,
touch
The assignable Parts for each Insertion Effect are as follows:
 CVP-609
• Insertion Effect 1 – 5: Keyboard Parts, Song channels 1 – 16
• Insertion Effect 6: Microphone, Song channels 1 – 16
• Insertion Effect 7 – 8: Style Parts
 CVP-605
• Insertion Effect 1 – 2: Keyboard Parts, Song channels 1 – 16
• Insertion Effect 3: Microphone, Keyboard Parts, Song channels 1 – 16
NOTE
Variation Effect Touch [INSERTION] or [SYSTEM] to switch the Effect Connection between the Insertion Effect
and System Effect, then touch the right end of this line to select the desired Effect type.
When "SYSTEM" is selected, this Effect is applied to all parts of the Song and Style as the System
Effect. When "INSERTION" is selected, this Effect is applied only to the specified Song/Style
part.
To adjust the degree to which the Effect is applied, use the knob of each part.
NOTE
For details about the Effect types, refer to the Data List.
Editing and Saving the Effect settings
You can edit the settings of the System Effects (Chorus, Reverb), Insertion Effects and Variation Effect. The edits can be
saved as a User Effect type.
1
From the Mixer display, touch the desired Effect type to call up the Effect Type Selection
display.
2
Select the Effect type if necessary, then touch
display.
2
3
Make the necessary setting for each parameter.
The available parameters differ depending on the Effect type.
4
Touch (Save), then save the settings as a User Effect type.
Up to 3 Effect types can be stored for each of the Reverb, Chorus and Variation Effect Blocks while up to 10 Effect
types can be stored for the Insertion Effect Blocks.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE
If you want to save the Effect settings to the USB flash memory, save as a User Effect file. To do this: From the display
called up via [Menu]  [Utility]  [Factory Reset/Backup]  page 2/2, touch [Backup] of "User Effect" to execute the
Save operation
CVP-609/605 Reference Manual
(Setting) at the upper right of this area and make necessary settings in the window.
For CVP-605, the Insertion Effect cannot be applied to the Style part.
(page 96).
Editing the Volume and Tonal Balance (Mixer)
(Setting) to call up the Effect Parameter
4
3
12