Creating Original Sounds Via The Live Control Knobs; Assigning Functions To The Live Control Knobs; Applying The Filter To The Main Voice - Yamaha PSR-I400 Owner's Manual

Creating Original Sounds via the LIVE CONTROL Knobs

The two LIVE CONTROL Knobs located in the lower left area of the panel can be used
to add variations to the sound being played, transforming the sound in a variety of
musical ways. Select the desired pre-programmed effect combination printed above
the LIVE CONTROL Knobs, then rotate the LIVE CONTROL Knobs to enjoy the sound.
Assigning Functions to the LIVE
CONTROL Knobs
Repeatedly press the [KNOB ASSIGN] button to
sequentially select the six effect combinations pro-
  
vided: (1) (2) (3) (4)
The current combination number is shown in the dis-
play.
Harmnum1
001
(1)–(2) affect the entire the Riyaz sound, (3)–(5)
affect the Main and Dual Voices only, and (6) affects
only playback of the Style and Riyaz.
For details about each LIVE CONTROL Knob effect,
refer to page 37.
Only selecting a function combination will not
affect the sound even if the LIVE CONTROL
Knob arrow is not at the initial position. After
operating the LIVE CONTROL Knob, the
selected effect is applied to the sound.
  
(5) (6) (1) ... etc.
001
Current combi-
nation number
Applying the Filter to the Main
Voice
1
Select the desired Main Voice.
Here, select "189 SquareLd" (Square-wave Lead)
as a synth-lead type Voice.
2
Press the [KNOB ASSIGN] button sev-
eral times until (3) (Filter) appears in the
display).
3
Rotate Knob B all the way to the right
(maximum), then play the keyboard with
your right hand while operating Knob A
with your left.
Filter
Cutoff
NOTICE
• Selecting a different Voice will replace the settings
created via the LIVE CONTROL Knobs with the default
settings of the new Voice. If you create a sound with
the LIVE CONTROL Knobs that you wish to keep,
make sure to memorize the settings to Registration
Memory (page 31) before selecting a different Voice.
NOTE
• Rotating a LIVE CONTROL Knob to the right while the
volume is set to a high level may result in distortion. If
this occurs, reduce the volume level.
Filter
Resonance
PSR-I400 Owner's Manual
21