Eizo ColorEdge CG210 User Manual page 50

15.The <Smoothing> cannot
be selected.
16.The Main menu of
ScreenManager does not
operate.
17.The FineContrast mode
does not operate.
18.The Auto adjustment
button does not operate.
19.USB function cannot be
setup.
20.PC is hung up. / The
peripherals connected to
the downstream ports do
not operate.
[ ] <Smoothing> is disabled when the screen is
displayed in the 1600 x 1200.
[ ] <Smoothing> is disabled when "Normal" is
selected in the <Screen Size> menu.
[ ] The image size is doubled both in
horizontally and vertically to (i.e. 1600 x
1200 enlarged from 800 x 600) provide clear
focus which does not require this function.
[ ] The adjustment lock is probably on.
unlock: switch the LCD monitor off. Then,
while pressing the Autadjustment button
switch, the power on.
[ ] Check that the Main menu of ScreenManager
is not activated.
[ ] The Auto adjustment button does not operate
when the digital signal is input.
[ ] The adjustment lock is probably on.
unlock: switch the LCD monitor off. Then,
while pressing the Auto adjustment button,
switch the power on.
[ ] Check that the USB cable is correctly
connected.
[ ] Check that the PC and OS are USB
compliant. (For verification of USB support,
consult the manufacturer of each system.)
[ ] Check the PC's BIOS setting for USB. ( For
details, refer to the manual of the PC.)
[ ] Check that the USB cable is correctly
connected.
[ ] Check the downstream ports by connecting
the peripherals to other downstream ports. If
the problem is solved by doing this, contact
an EIZO dealer. (For details, refer to the
manual of the PC.)
[ ] Try executing the following method.
Restarting the PC - Restarting the PC
Connecting the PC and peripherals
directly
If the problem is solved by doing this,
contact an EIZO dealer.
To
To