Table of Contents
Advertisement
7. Horizontal bars of
distortion appear.
8. Letters and lines appear
blurred.
9. Distortion appears like the
figure below.
10.The screen is too bright
or too dark.
11. Afterimages appear.
12.The screen has defective
pixels (e.g. slightly light
or dark).
13.Fingerprints remain on
the screen.
14.The noise appears on the
screen.
[ ] Decrease the horizontal bars using the
<Phase>.
[ ] Adjust the blurred lines using <Smoothing>.
[ ] This happends when both composite (X-OR)
input signal and separate vertical
synchronizing signal are input. Please select
one of the two.
[ ] Adjust the <Brightness> (The backlight of
the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please consult your dealer.)
[ ] When the screen image is changed after
displaying the same image for a long period,
an afterimage may appear. The "Afterimage"
can be removed gradually by changing the
displayed image. Use the
function and avoid keeping the screen on all
the time.
[ ] This is due to the characteristics of the panel
itself, and not the LCD product.
[ ] Leaving the screen white may solve the
problem.
[ ] Change the mode in <Signal Filter> in the
<Screen> menu.
<Off
Timer>
Hide quick links:
Advertisement
Table of Contents
