Table of Contents
Advertisement
Before connecting your monitor to the PC, change the display screen settings
(resolution
and frequency) in accordance with the
* When your computer supports VESA DDC, the suitable resolution and the
refresh rate are set by just plugging your monitor into the computer without any
manual settings.
* Be sure that the power switches of both the PC and the monitor are OFF.
1.Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
APPENDIX
charts.
Hide quick links:
Advertisement
Table of Contents
