Table of Contents
Advertisement
The values shown in the Kelvin are available only as a
*
reference tool.
*
Adjusting the <Gain> turns the <Temperature> adjustement
"OFF".
*
Setting the temperature under 4,000 K or over 10,000 K
invalidates the color temperature setting. (The color
temperature's setting turns "OFF".)
Gamma
To set the gamma value
* I
f setting the gamma value, the using the monitor in the
digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma
value from 1.8 to 2.2.
To change the saturation
Saturation
*
The <Saturation> adjustment may cause undisplayable color
tone.
To change the flesh color, etc. -100 ~ 100
Hue
*
The <Hue> adjustment may cause undisplayable color tone.
To change each color (red,
Gain
green and blue)
*
The values shown in the percentage are available only as a
reference tool.
*
Setting the <Temperature> invalidates the <Gain>
adjustment. <Gain> setting returns to the default setting.
To adjust <Saturation> and
6 colors
<Hue> in each color (Red,
Yellow, Green, Cyan, Blue
and Magenta)
To return the color settings of
Reset
the selected mode to the
default settings
1.8 ~ 2.6 (in 0.2 increments)
-100 ~ 100
Setting the minimum level (-100)
turns the image to the monochrome.
0 ~ 100%
By adjusting the red, green and blue
color tones for each mode, custom
colors can be defined. Display a
white or gray background image and
adjust the <Gain>.
Hue: -100 ~ 100
Saturation: -100 ~ 100
Select the <Reset>.
Hide quick links:
Advertisement
Table of Contents
