Searching For Bootable Media - HP Visualize c100 Service Handbook

C class
Hide thumbs Also See for Visualize c100:
Table of Contents

Advertisement

Chap4.doc 60 Fri Sep 15 14:08:14 1995
Troubleshooting
Dealing with a Boot Failure

Searching for Bootable Media

To list all devices that may contain bootable media, go
to the Main Menu of the Boot Console Interface and
then type the following at the prompt:
search ipl
The search may turn up more devices than there are
lines on the display. If using a text terminal, control
the progress of the search from the terminal's key-
board by performing the following steps:
To hold the display temporarily, press Ctrl S
To continue the display, press Ctrl Q
To halt the search, press Esc
These flow-control commands do not work with a
bitmapped display, but such a display can show more
than forty lines of text, so they are unnecessary.
To search for devices of just one type that actually con-
tain bootable media, go to the Main Menu of the Boot
Console Interface and then type the following at the
prompt:
search ipl device_type
where device_type is one of the following:
fwscsi is the built-in fast, wide SCSI bus
slotn.fwscsi is an optional fast, wide SCSI bus
scsi is the built-in single-ended SCSI bus
lan is all connections to the built-in LAN
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

C110

Table of Contents