HP Visualize c100 Service Handbook page 52

Chap3.doc 38 Fri Sep 15 14:07:30 1995
NOTE:
NOTICE:
Table 8
Configuration
FRU Configurations
There are no jumper settings to change for the floppy drive.
These SCSI IDs are the default IDs for each storage
device. If an existing device already uses an ID, select
an alternate ID.
The floppy disk drive is not a SCSI device.
Default SCSI IDs
Fast, Wide Differential SCSI
1st Hard Disk Drive
2nd Hard Disk Drive
3rd Hard Disk Drive
Single-Ended SCSI
CD-ROM Drive
DDS Drive
Notes: The floppy drive is NOT a SCSI device.
The controller is set to SCSI ID 7.
38
ID 6
ID 5
ID 4
ID 2
ID 3