Removing The Hard Disk And Floppy Disk Tray(S); Desktop Models; Minitower Models - HP Vectra VEC 7 Supplementary Manual

Removing the Hard Disk
and Floppy Disk Tray
Removing the Hard Disk
Tray

Removing the Hard Disk and Floppy Disk Tray(s)

Desktop Models

1 Remove the computer's cover.
2 Disconnect the power and data cables from the rear of the floppy disk
drive and the hard disk drive(s).
3 Remove the two retaining screws from the floppy disk/hard disk drive
tray, and then carefully lift the tray from the PC.
4 Place the tray on a table/desk top.

Minitower Models

1 Remove the computer's cover.
2 Remove the data and power cables from the rear of the hard disk drive(s).
3 Push the retaining clip down.
4 Slide the hard disk drive tray backwards away from the front of the PC.
Removing the Hard Disk and Floppy Disk Tray(s)
Hard disk and
floppy disk drive
tray
13