Removing The Front Bezel; Desktop Models; Minitower Models - HP Vectra VEC 7 Supplementary Manual

Removing the Front Bezel

Desktop Models

1 Remove the computer's cover.
2 Disconnect the power and data cables from the rear of the floppy disk
drive and hard disk drive(s).
3 Remove the two retaining screws from the floppy disk/hard disk drive
tray, and then carefully lift the tray from the PC. Place the tray on a table/
desk top.
4 Unclip the front bezel and gently remove it from the chassis.
Step 2

Minitower Models

1 Remove the computer's cover.
2 Squeeze the retaining clips together and then, standing in front of the PC,
carefully lever the bezel away from the chassis.
Retaining clips
Squeeze each retaining
clip in turn with one
hand, while gently
pulling the front bezel
forward with the other
Step 3
Step 4
Removing the Front Bezel
15