Hard Disk Drive Fan; Removing The Hard Disk Drive Fan - HP x4000 Technical Reference Manual

Hard Disk Drive Fan

Removing the Hard Disk Drive Fan

To remove the hard disk drive fan:
1. Turn off the display and shut down the Workstation. Disconnect all
2. Remove the Workstation's cover as described in "Removing the Left
3. Place your Workstation on its side with the system board facing
4. Open the hard disk drive cage as described in "Opening the Hard
NOTE
5. Disconnect the hard disk drive fan's power cable from the system
6. Remove the two screws that mount the hard disk drive fan to the
Chapter 10
This manual downloaded from http://www.manualowl.com
power cables and any LAN or telecommunications cables.
Side Cover" on page 145.
upwards.
Disk Drive Cage" on page 149.
The hard disk drive fan is located behind the hard disk drive cage.
board.
chassis as shown in "Removing the Fan and Speaker Assembly" on
page 192.
Installing or Replacing Parts and Accessories
Hard Disk Drive Fan
195