Selecting A Destination From The Job Log - Konica Minolta bizhub 601 User Manual

Using fax/scan functions
3
Touch the button for the desired destination, and then touch [OK].
– To cancel a selection, touch the button for a selected destination again.
4
Touch [Close].

3.2.2 Selecting a destination from the job log

Follow the procedure described below to select a destination from the job log.
Note
This feature is not available with Internet faxing or IP address faxing.
If "Confirm Address (TX)" is specified in the administrator settings, Job History
tab cannot be used. For details on the settings of "Confirm Address (TX)", refer to
the User's Guide [Network Scan/Fax/Network Fax Operations].
1
Touch the Job History tab.
The Job History list appears.
751/601
3
3-7