Printing A Proof To Check The Settings (Proof Copy) - Konica Minolta bizhub 601 User Manual

Using copy functions

2.13 Printing a proof to check the settings (Proof Copy)

Before printing a large number of copies, a single proof copy can first be
printed so that it can be checked. This prevents copy errors from occurring.
Note
When printing a proof copy, specify multiple copies.
This feature cannot be used if the "Group" setting is selected.
1
Position the original to be copied.
– For details on positioning the original, refer to
page 1-11.
2
Select the desired copy settings.
3
Press the [Proof Copy] key.
– If the original was loaded on the original glass, touch [Finish], and then
press the [Start] key.
A single proof copy is printed.
4
Check the proof copy.
– To change the copy settings, press the [C] (clear) key or the [Reset] key,
and then change the settings.
751/601
"Feeding the original" on
2
2-34