Preparations; Names Of Parts; Main Body - Kyocera KM-2550 Operation Manual

1

Preparations

Names of parts

Main body

1
1
2
3
4
5
6
Important!
NEVER attempt to remove the Scanner Interface Card.
3 2
Original cover — Open and close this cover when setting an original on the platen.
Platen — Set the original to be scanned face-down in the left-rear portion of the platen.
Original size indicator lines — Be sure to align the original with these lines when setting an
original on the platen.
Operation panel — Perform operations here.
Main switch — Turn this switch ON (|) when using the scanner.
Scanner interface connector — Use to connect the scanner to the computer network with a
10BASE-T or 100BASE-TX cable.
4 5
6
1-1