3
Performing the Required Operation at the
Scanner
Scanning under the Scan to PC and Send E-mail functions
Before using the Scan to PC function
When performing the Scan to PC function, perform the following settings in advance.
1
Install the Scanner File Utility in the destination computer.
2
Run the Scanner File Utility and register the destination folder for the scanned image data.
3
Register the IP address, the registration name, and the destination number of the destination
Note
Be sure to enter the same number in the Save folder No. field here as the save folder number (001
– 100) that was registered in the Scanner File Utility.
Refer to the On-Line Manual <Functions Edition> for more detailed information.
Before using the Send E-mail function
Register the destination name and the email address in the scanner using a web browser or
Address Editor.
How to scan under Scan to PC and Send E-mail
1
Press the Scanner key to display the Select Scanner
Function screen.
2
Use the
(SEND TO PC) or 2 Send E-mail.
Use the
3
name and press the Enter key.
Notes
•
•
computer in the scanner using a web browser or Address Editor.
and
keys to select 1 Scan to PC
and
keys to move
If a password has been registered for the selected user, you must enter the password. Enter
the password using the numeric keys and press the Enter key.
If your user name is not displayed even if the
or AddressEditor to check to see if your user name has been registered.
Select function.
to select your user
Select Sender (User)
#---
and
Scan to PC
Send E-mail
TWAIN
001 USER ABCDE
keys are pressed, use a web browser
3-1