Onboard Device Configuration - Asus M2A-VM HDMI User Manual

PCI.Latenct.Timer.(CLK).[64]
Use <+> and <-> to adjust the value. The value ranges from 0 to 255.
Maximum Payload Size [4096]
Sets maximum TLP payload size for the PCI Express devices. The unit is byte.
Configuration options: [128] [256] [512] [1024] [2048] [4096]
2.4.4

Onboard Device Configuration

Advanced
Onboard Device Configuration
South OnChip IDE Device
South OnChip PCI Device
HD Audio Device
Front Panel Type
Primary Display Adapter
Onboard 1394
Onboard LAN
Onboard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
x ECP Mode Use DMA
F1:Help ↑↓ : Select Item
ESC: Exit →←: Select Menu
South OnChip IDE Device
Advanced
IDE DMA transfer access
OnChip IDE Channel0
IDE Prefetch Mode
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
OnChip IDE Channel 0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller .
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Disabled]
Allows you to enable or disable the IDE PIO read prefetch mode.
Configuration options: [Disabled] [Enabled]
ASUS M2A-VM HDMI
Phoenix-Award BIOS CMOS Setup Utility
[Enabled]
[HD Audio]
[PCIEx]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[EPP]
3
-/+: Change Value
Enter: Select SubMenu
Phoenix-Award BIOS CMOS Setup Utility
South OnChip IDE Device
[Enabled]
[Enabled]
[Disabled]
Select Menu
Item Specific Help
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
2-25