Asus M2A-VM HDMI User Manual page 47

15. Ports on the HDMI module
This module contains four ports, allowing you to connect any kind of video/
audio source to your system. Connect the HDMI module to the onboard PCI
Express x16 slot and the HDMI module cable to the onboard
YUV/SPDIF_OUT connector.
• Refer to page 1-29 for the position of the onboard YUV/SPIDF_OUT
connector.
• After installing the HDMI module, make sure the audio device of Sound
playback is HDMI Audio rear output (the name may be different based
on.the.OS). Go to Start > Control Panel > Sounds and Audio Devices >
Sound Playback to configure the setting.
a
b
c
d
HDMI.port. This port is for a high-definition multimedia interface (HDMI)
a.
connector.
S-Video port / YPbPr port. This 7-pin port connects any kind of video source
b.
via the bundled YPbPr cable or an S-Video cable.
Video.port. This port connects any kind of video source via an RCA cable.
c.
S/PDIF Out port. This port connects an external audio output device via an
d.
coaxial S/PDIF cable.
• The RCA cable and the S-Video cable are purchased separately.
• Simultaneous output for YPbPr, AV, S, and RGB is not supported.
Dual display table
This table indicates two corresponding displays when you connect two monitors on any two of
the following ports.
Onboard.VGA.ports.
DVI.
•
•
•
ASUS M2A-VM HDMI
HDMI module ports
RGB HDMI
•
•
• •
•
YPbPr.cable
TV (S-Video/
Video/YPbPr)
•
•
1-35