Hardware Monitor - Asus M2A-VM HDMI User Manual

Date of Month Alarm [xx]
To set the date of alarm, highlight this item and press <Enter> to display the
Date of Month Alarm pop-up menu. Key-in a value within the specified range
then press <Enter>. Configuration options: [Min=0] [Max=31]
Alarm Time (hh:mm) [xx:xx:xx]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu
for the hour field.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press <TAB> to move to the minutes field then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
5. Press <TAB> to move to the seconds field then press <Enter>.
6. Key-in a value (Min=0, Max=59), then press <Enter>.
2.5.4. Hardware.Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Q-Fan Controller
CPU Fan Type
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
MB Temperature
CPU FAN Speed
CHA_FAN Speed
PWR_FAN Speed
CPU Fan Speed warning
Q-Fan.Controller.[Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU.Fan.Type.[DC]
Allows you to select the CPU fan type.
Configuration options: [DC] [PWM]
2-30
Phoenix-Award BIOS CMOS Setup Utility
Power

Hardware Monitor

[Enabled]
[DC]
[1.56V]
[3.18V]
[5.05V]
[11.58V]
3068 RPM
[800 RPM]
48ºC
41ºC
0 RPM
0 RPM
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Chapter 2: BIOS setup