Onboard Device Configuration - Asus MAXIMUS III EXTREME User Manual

3.5.3

Onboard Device Configuration

Advanced
Onboard Device Configuration
Onboard Devices
HDA Controller
Front Panel Type
Realtek LAN
LAN Boot ROM
Onboard 1394 Controller
J-Micron Controller
Marvell 9123 Controller
Marvell 9123 Boot ROM
Onboard USB 3.0 Controller
HDA Controller [Enabled]
[Enabled] Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
Front Panel Type [HD Audio]
[AC97] Set the front panel audio connector (AAFP) mode to legacy AC'97
[HD Audio] Set the front panel audio connector (AAFP) mode to high-
definition audio.
Realtek LAN [Enabled]
[Enabled] Enables Realtek LAN Controller.
[Disabled] Disables Realtek LAN Controller.
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables Realtek LAN Boot ROM.
[Enabled] Enables Realtek LAN Boot ROM.
Onboard 1394 Controller [Enabled]
[Enabled] Enables the onboard 1394 Controller.
[Disabled] Disables the controller.
J-Micron Controller [IDE Mode]
[Disabled] Disables the J-Micron controller.
[IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk
drives as Parallel ATA physical storage devices.
[AHCI Mode] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advabced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
ROG Maximus III Extreme
BIOS SETUP UTILITY
[Standard]
[Enabled]
[HD Audio]
[Enabled]
[Disabled]
[Enabled]
[IDE Mode]
[IDE Mode]
[Auto]
[Enabled]
Get your best
overclocking record!
"Onboard Device" is
to disable all the
unnecessary devices
when you want to reach
your best overclocking
record. But it will
keep 1 lan port alive
to submit your score.
3-25