Onboard Device Configuration - Asus P5N73-CM Manual

2.4.6

Onboard Device Configuration

IDE.Function.Setup
OnChip IDE Channel 0 [Enabled]
Allows you to enable or disable the OnChip IDE channel 0 controller.
Configuration options: [Disabled] [Enabled]
IDE DAM transfer access [Enabled]
Allows you to enable or disable IDE DMA transfer access .
Configuration options: [Disabled] [Enabled]
Serial-ATA Controller [Enabled]
Allows you to enable or disable the Serial-ATA controller.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE prefetch mode.
Configuration options: [Disabled] [Enabled]
Serial-ATA configuration
SATA Operation Mode [IDE]
Allows you to select SATA operation mode. Configuration options: [IDE] [RAID] [AHCI].
The following items become user-configurable when the SATA.Operation.Mode item is set
to [RAID].
SATA 1 / 2 / 3 / 4 [Disabled]
Allows you to enable or disable SATA 1 / 2 / 3 / 4. Configuration options: [Disable]
[Enabled]
HD.Audio.Controller.[Auto]
Allows you to enable or disable the HD Audio controller.
Configuration options: [Auto] [Disabled]
Front.Panel.Support.Type.[HD.Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC`97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
Configuration options: [AC97] [HD Audio]
Onboard.nVidia.LAN.[Enabled]
Allows you to enable or disable the onboard nVidia LAN device support.
Configuration options: [Disabled] [Enabled]
OnBoard.LAN.Boot.ROM.[Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Enabled] [Disabled]
Serial.Port1.Address.[3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Parallel.Port.Address.[378/IRQ7]
Allows you to select the Parallel Port address. Configuration options: [Disabled] [378/IRQ7]
[278/IRQ5] [3BC/IRQ7]
ASUS P5N73-CM 2-17