Assembling And Hanging The Fan - Hunter 23902 Installation And Operation Manual

Note: Your Hunter fan comes with an optional downrod extension
pipe. If you are hanging the fan on a ceiling higher than 10 feet tall
and you would like to use the enclosed optional downrod, follow
steps 3-5 3-9 on the next page.
–
3-1. Unbundle the wires from the fan.
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
For Standard or Angled mounting:
3-2. Insert the downrod through the canopy and canopy trim ring.
Feed the wires from the fan through the downrod.
3-3. Using the provided Allen wrench, loosen the setscrew on the
adapter to install the pipe and ball assembly. Note: When the
pipe and ball assembly is fully installed, 2-3 threads on the pipe
will still be visible; this is normal. Use the Allen wrench to securely
retighten the setscrew.
CAUTION: The adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
3-4. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim.
3 • Assembling and Hanging the Fan
Allen Wrench
6
42776-01 • 04/29/08 • Hunter Fan Company
Steps 3-2 – 3-3
Downrod
Canopy
Canopy
Trim Ring
Setscrew
Step 3-4
U-shaped
Hole