Hunter 23902 Installation And Operation Manual page 7

Type 2 models

Hide thumbs Also See for 23902:

Table of Contents

Optional Downrod Instructions:

Your Hunter fan comes with an optional downrod extension

pipe. If you would like to use the enclosed optional 6 inch

downrod, follow the steps on this page.

Note: The Perfect Balance

that are 6" and shorter. If you use a downrod longer than 6

inches, do not activate the Perfect Balance

3-5. Remove the pipe ball screw from the standard downrod,

then slide the ball off the pipe.

3-6. Remove the pin from the pipe, then slide the wedge off the

pipe.

3-7. Remove the screw and ground wire from the pipe.

3-8. Reassemble the ground wire, wedge, pin, ball, and pipe ball

screw, in that order, onto the long downrod.

3-9. Go back to Step 3-2.

3 • Assembling and Hanging the Fan

system is designed for downrods

system.

42776-01 • 04/29/08 • Hunter Fan Company

Steps 3-5 – 3-8

Ground Wire

and Screw

Ball

Pipe Ball Screw

Wedge

Step 3-8

U-shaped

Hole

Table of Contents