Controlling The Multiscreen Monitor; Selecting The Multiscreen Monitor; Controlling The Camera Images - Panasonic WJ-FS616C Operating Instructions Manual

Controlling the Multiscreen
Monitor
The operations described below are available on the multi-
screen monitor.
Note: We recommend using the spot monitor in single spot
for preventing image disturbance when displaying non-
interlace images.

Selecting the Multiscreen Monitor

1. Select the multiscreen monitor by pressing the [MULTI-
SCREEN] button repeatedly.
The indicator in the button is on to indicate the multi-
screen monitor is selected.
Note: The indicator in the button blinks to indicate the multi-
screen 2 monitor is selected, if applicable.
2. Press the [VCR/CAM] button will toggle the indicator in
the button on and off.
Off: Indicates camera images (Live Mode) is selected.
On: Indicates playback images (VCR Mode) is select-
ed.
3. In this condition, select the images to be displayed on
the monitor screen followed the procedure shown
below.

Controlling the Camera Images

While the VCR/CAM button is off, the camera images on the
monitor can be controlled
described below.
Single Spot (Live)
1. Select an image to be displayed on the monitor by
pressing a [1 – 16] button.
49
MULTI
SCREEN
VCR
CAM
followed the procedure
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2
2. To select another image, press a [1 – 16] button corre-
sponding to the image.
The selected image appears on the monitor screen.
The indicator in the button previously selected turns off
and the indicator in the button currently selected lights.
Freezing Single Spot (Live)
While the image on the monitor screen is displayed in sin-
gle spot mode, the image can be frozen followed the pro-
cedure below.
1. Select an image to be frozen on the monitor by press-
ing a [1 – 16] button.
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2
2. Press the [STILL] button to display the freeze image on
the monitor.
The indicator in the STILL button lights and the indicator
in the pressed CAMERA button starts to blink.
STILL
STILL