Panasonic WJ-FS616C Operating Instructions Manual page 50

Video multiplexer
Hide thumbs Also See for WJ-FS616C:
Table of Contents

Advertisement

3. To cancel this mode, press the [STILL] button to return
to the image previously shown.
The indicator in the button goes off.
Zooming Single Spot (Live)
While the image on the monitor screen is displayed in sin-
gle spot mode, the image can be zoomed followed the pro-
cedure below.
1. Select an image to be zoomed on the monitor by press-
ing a [1 – 16] button.
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2
2. Press the [EL-ZOOM] button to display the zoomed
image on the monitor.
The indicator in the button lights to indicate zoom mode
is selected.
EL-ZOOM
3. In the zoom mode, pressing the C, D, A, or B button
will move the image in the direction of the button.
4. To cancel this mode, press the [EL-ZOOM] button to
return to the image previously shown.
The indicator in the button goes off.
50
Multiscreen Spot (Live)
The monitor can display the camera images on a 4, 7, 9,
10, 13 and 16 multiscreen shown below.
1. Select the screen segments to be displayed on the
monitor by pressing the [MULTISCREEN SELECT] but-
ton repeatedly.
MULTISCREEN
SELECT
Each time the [MULTISCREEN SELECT] button is
pressed, the next group of 6 multiscreens available is
displayed as follows.
1 2
3
4
1
5 6
7
8
9 10 11 12
3
13 14 15 16
2
3
1
1
4
5
6 7
8
9
3 4
10 11 12 13
7 8
Notes:
• Any camera can be assigned to any segment in the
pattern.
• The setting can be adjusted in such a way that a
screen segment for displaying an image on the spot
monitor screen in the single spot mode is blacked
out.
Refer to the SECRET VIEW for further details.
2. To display a single spot image, select an image to be
displayed on the monitor by pressing one of the CAM-
ERA buttons that the indicator in the button lights up.
Freezing Multiscreen Spot (Live)
The monitor can display the freeze camera images on a 4,
7, 9, 10, 13 and 16 multiscreen shown below.
1. Select the screen segments to be displayed on the
monitor by pressing the [MULTISCREEN SELECT] but-
ton repeatedly.
MULTISCREEN
SELECT
2
1
2
4
5
3
4
6
7
1
2
3
2
4
5
6
5
6
7
8
9
9 10

Advertisement

Table of Contents
loading

Table of Contents