Wireless > Security - Basic Page - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact
Wireless > NETWORK page fields (continued)
Field Description
Transmit Power Sets the transmit power on the
mW. The default is 32 mW. Transmit power control is an optional IEEE 802.11b feature.
RTS Threshold The Request To Send Threshold sets the packet size at which the access point issues an
before sending the packet. A low RTS can help when many clients are associated with the
SBG1000
The value can be 0 to 2347 bytes. The default is 2347.
Fragmentation Sets the size at which packets are fragmented (sent as several packets instead of as one
Threshold packet). A low Fragmentation Threshold can help when communication is poor or when there
is a significant interference.
The default is 2346. The value can be 256 to 2346 bytes.
Enable Short Preamble Short preamble can improve throughput when the
clients operate at 2, 5.5, or 11 Mbps. If you enable short preamble, be sure all wireless clients
also support short preamble. Short preamble is an optional IEEE 802.11b feature that is useful
if maximum throughput is important and interoperability with legacy IEEE 802.11b equipment is
not required. The default is Disabled.
Wireless > SECURITY — basic Page
Use this page to configure basic Wired Equivalent Privacy (WEP) settings.
CAUTION!
The default Authentication setting of Disable WEP provides no security for transmitted data.
For information about using this page, see
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
or when the clients are far apart and can detect the
"Configuring Basic Wireless LAN Security"
X
73
Exit
FAQ Specifications Glossary License
SBG1000
wireless access point — 1, 2, 5, 10, 25, 50, or 100
SBG1000
SBG1000 Wireless Cable Modem Gateway User Guide
SBG1000 but not each other.
access point and associated
on page 69.
RTS