Setting The Volume Of A Room Within A Group; Changing A Grouping - AMX DAS-MI-0404 Operation/Reference Manual

1. To adjust the relative volume, in the Groupings bar, click the group you want to change.
2. In the Relative area, click the increase or decrease button.

Setting the Volume of a Room within a Group

Adjusting the volume of a room individually is the same as when a source is simply playing in a room.
See the Room Volume section on page 29 to individually adjust a room's volume.

Changing a Grouping

You can easily change any grouping setting in the Grouping Controls area.
1. In the Groupings bar, click the grouping you want to change. The table below describes how to
change the grouping.
Changing a grouping
To...
Remove a room from the grouping
Add a room to a grouping
Change the relative volume of all rooms in the
group
Change the absolute volume of all rooms in the
group
To mute the volume of all rooms in a group
The Mute button toggles between mute and volume on.
Mi-Control Mi-Series Configuration Software
Do this...
In the Included Rooms list, select the check box of the room
you want to remove.
In the Included Rooms list, select the check box of the room
you want to add.
Click the Relative increase or decrease button.
Move the Absolute volume slide to increase or decrease
the volume.
Click Mute.
Working with Groupings
35