Refreshing Mi-Control; Refreshing All Rooms And All Sources; Refreshing A Particular Room And Source - AMX DAS-MI-0404 Operation/Reference Manual

Refreshing Mi-Control

Since changes to the Mi-Series Controller can be made not only from within the Mi-Control application,
but also from the room keypads, you may wish to refresh Mi-Control from time-to-time to ensure you
have the most up to date information.

Refreshing All Rooms and All Sources

1. From the Main window, click the Refresh All button.
Refreshing all states from the Mi-Series controller can take a few seconds depending
on network speed and quality. For example, refreshing over a wireless network will
take more time than over a wired network connection. During this time, commands
you issue from Mi-Control may take longer than normal to process. Please be patient.

Refreshing a Particular Room and Source

1. In the Rooms bar, click the room you want to refresh.
2. In the Room Controls, Advanced area, click the Refresh button.
This command refreshes the information for the room, as well as the source that is
currently playing in that room (if any). This command is much quicker than
Refreshing all rooms and all sources, and is recommended when you only want to
update one room.
Mi-Control Mi-Series Configuration Software
Working with Room Controls
31