Telephone Base Installation - AT&T TL86109 Quick Start Manual

Telephone base installation

Install the telephone base as shown below.
Option 1: For using a 2-line wall jack
Plug the large end
of the AC power
adapter into a power
outlet not controlled
by a wall switch.
Raise the antenna.
Route the cords
into the slots.
Plug one end of the
black telephone line
cord into the
LINE 1/L1+L2
telephone jack at
the bottom of the
telephone base.
Line  + line 2
telephone wall jack
2
Use a telephone line cord
with 4-conductor (not
included) to connect the
DSL filter and the 2-line
telephone wall jack.
DSL filter (not included)
is required if you have
DSL high-speed Internet
service.
Plug the other end of the
black telephone line cord
into the DSL filter
(if required).
Black telephone line cord
Plug the small end of
the AC power adapter
into the power jack
at the bottom of the
telephone base.
Plug the other end
of the coiled handset
cord into the jack at
the bottom of the
telephone base.