Accessing Voicemail - AT&T Synapse SB67020 User Manual

Accessing Voicemail

For more information about Voicemail, see
To access an entry from Voicemail:

Messages 1/10
Graham Bell ! Jul 19
232-555-0176 1:18p
Play DelMsg Callback
Figure 101. Voicemail
Messages
Do you w ish to leave a new
m essage or listen to your
m essages?
Lv Msg Listen
Figure 102. Leave New or
Listen Choice
Accessing Items in Lists
Synapse SB67020 User's Guide
"Voicemail" on page
1. Press MENU, then 1, and then 4 to access the Messages screen.
If necessary, use the dial pad to enter your user password and press SELECT.
Once you have entered your password, you do not have to enter it again while you
are reviewing messages. However, if you exit the Messages screen or go to another
feature, you will need to enter your password to access the Message list.
The screen that appears depends on your system configuration.
If you do not have Voicemail Distribution enabled or access to a Group Mailbox, Voicemail
messages appear showing new and old messages, as shown in Figure 101.
If you have enabled Voicemail Distribution (see
Leave New or Listen screen displays, as shown in Figure 102.
Press to create a message to send to a Voicemail Distribution List. See

"Forwarding a Voicemail Message" on page
Press to view the Mailbox List (if you have Group Mailboxes), as shown in

Figure 103 on page 78
97.
"Voicemail Distribution" on page
107.
or Voicemail messages, as shown in Figure 101.
77
42), the