Xmodem (Via The Console Cable) - 3Com 5500-EI PWR Getting Started Manual

72 C 6: U
HAPTER PGRADING
XModem (via the
console cable)
S
OFTWARE
Information on your FTP server is displayed, logon with your username
and password.
2 To download the configuration file, enter:
get 3ComOScfg.def
The following information is displayed if the download has been
successful:
200 PORT command successful.
150 Opening ASCII mode data connection for
vrpcfg.def(10986 bytes).......226 Transfer complete.
FTP: 10986 byte(s) received in 8.046 second(s) 1000.00
byte(s)/sec.
3 Enter quit to exit.
To upgrade software to your Switch via XModem do the following:
1 From the User View, enter:
xmodem get unit1>flash:/3ComOScfg.def
The following information is displayed:
**** WARNING ****
xmodem is a slow transfer protocol limited to the
current speed
settings of the auxiliary ports.
During the course of the download no exec input/output
will be available!
Proceed?[Y/N]y
Destination filename [unit1>flash:/vrpcfg.def]?
Before pressing ENTER you must choose 'YES' or
'NO'[Y/N]:
2 Enter y to display the following message:
Download with XMODEM protocol...
...C..