Configuration
Conversion Utility
Use the admin default user name (no password) to login and carry out
initial Switch setup.
To set a password for the admin user in the CLI, enter the following from
system view:
[5500-xx]local-user admin <cr>
[5500-xx-luser-admin]password simple xxxxxxxx
(where xxxxxxxx is your chosen password).
Save the configuration in the User View.
For information on the lost password procedure please refer to the
Configuration Guide that is supplied with your Switch.
The 3Com Switch 5500 Configuration Conversion Utility (CCU) enables
you to convert the key configuration parameters from a range of 3Com
SuperStack II and SuperStack 3 devices to the configuration file format
used by your Switch 5500 unit. The utility provides conversion for a
number of Switch features
To download the CCU package, select the CCU link on the CD that
accompanies your Switch 5500. Alternatively, the CCU download and
further information is available at:
http://www.3com.com/switchmigration/
Configuration Conversion Utility
49