Xmodem (Via The Console Cable) - 3Com 4500 Getting Started Manual

XModem (via the
console cable)
1 From the User View, enter:
2 Enter y to display the following message:
3 As the file is downloading, start the XModem send file process with
4 Repeat steps 1 to 3 for each of the remaining files.
To upgrade software to your Switch via XModem, do the following:
xmodem get unit1>flash:/3ComOScfg.def
The following information is displayed:
**** WARNING ****
xmodem is a slow transfer protocol limited to the
current speed
settings of the auxiliary ports.
During the course of the download no exec input/output
will be available!
Proceed?[Y/N]y
Destination filename [unit1>flash:/vrpcfg.def]?
Before pressing ENTER you must choose 'YES' or
'NO'[Y/N]:
Download with XMODEM protocol...
...C..
terminal emulation software, such as Microsoft HyperTerminal.
When the file download is complete the message Download
successful! is displayed.
Upgrading from the Command Line Interface 83